최고의 가격을 얻으십시오
따옴표
제품 세부 사항
원래 장소: 중국
브랜드 이름: BOEN FIRE
인증: ISO9001、CCCF、CNEX、SIL2
모델 번호: GT-CDI2950DEx
지불 및 배송 조건
최소 주문 수량: 1
가격: 협상 가능
배달 시간: 15-20 일
지불 조건: 신용장, 티/티
인증: |
CCC, explosion-proof (CNEx22.1282X), type approval & inspection report, compliant with GB standards |
발각: |
촉매 연소(핫 스왑 가능), 3~100%LEL, 30초 이하 반응, 자연 확산 |
감지기: |
3년 수명, 메탄/프로판/수소용 |
경보: |
25%/50%LEL 임계값, 청각(75~95dB)/시각(70Cd) 경보 옵션 |
의사소통: |
4-20mA + RS485(Modbus), 전송 ≤1000m |
하드웨어: |
DC18~28V, -40~70℃, IP66, 금속 케이스(2kg), G3/4" 스레드 |
디스플레이 및 작동: |
LCD 화면, 적외선 원격(5m 이하), 주소/경보 임계값 조정 |
유지: |
6개월마다 교정, 연간 검증, 재교정을 통한 센서 교체 |
인증: |
CCC, explosion-proof (CNEx22.1282X), type approval & inspection report, compliant with GB standards |
발각: |
촉매 연소(핫 스왑 가능), 3~100%LEL, 30초 이하 반응, 자연 확산 |
감지기: |
3년 수명, 메탄/프로판/수소용 |
경보: |
25%/50%LEL 임계값, 청각(75~95dB)/시각(70Cd) 경보 옵션 |
의사소통: |
4-20mA + RS485(Modbus), 전송 ≤1000m |
하드웨어: |
DC18~28V, -40~70℃, IP66, 금속 케이스(2kg), G3/4" 스레드 |
디스플레이 및 작동: |
LCD 화면, 적외선 원격(5m 이하), 주소/경보 임계값 조정 |
유지: |
6개월마다 교정, 연간 검증, 재교정을 통한 센서 교체 |
GT-CDI2950DEx Industrial and Commercial Point-Type Flammable Gas Detector
1.Product Overview
This product is an explosion-proof device, suitable for Zone I and Zone II environments where there may be leakage or explosion hazards of flammable or toxic and harmful gases in industries such as petroleum, chemical engineering, gas storage stations, and wine factory production workshops. It is not applicable to Zone 0 or underground coal mine environments. The detector can conduct safe detection and give advance alarms for gas leakage accidents.
The detector features TFT liquid crystal display, infrared remote control, three-wire 4mA-20mA output, RS485 bus communication (Modbus RTU protocol), and passive contact output functions.
2.Product Features
(1) Adopts a segment LCD display with infrared remote control function, making debugging convenient.
(2) Uses a thermistor sensor, enabling maintenance personnel to replace all sensors in the entire site easily.
(3) Equipped with sound and light alarm function. When detecting combustible gas leakage, the detector will issue a harsh sound and light alarm to avoid.
(4) Has zero-point correction function, which can avoid measurement errors caused by zero-point drift.
(5) Features a standard RS485 interface based on the Modbus (RTU) protocol.
(6) Can be matched with JB-QB-CH210 combustible gas alarm controller, PLC, DCS and other systems for use.
(7) Adopts a single-chip microcomputer processing system, which has stable performance, strong anti-interference ability and low power consumption.
3.Main Technical Data
| Item | Content |
| Detection Principle | Catalytic Combustion (Hot-swappable Type) |
| Sampling Method | Natural Diffusion |
| Detection Range | 3~100%LEL |
| Resolution | 1%LEL |
| Response Time | ≤30s |
| Measurement Error | Full Scale ±3%LEL |
| Resolution | 1%LEL |
| Low Alarm Value | 25%LEL |
| High Alarm Value | 50%LEL |
| Audible Intensity (Optional) | 75~95dB |
| Flash Intensity (Optional) | 70cd |
| Applicable Gas | Methane, Propane, Hydrogen |
| Display Mode | LCD Display |
| Signal Transmission | 4mA~20mA Output, Standard RS485 Interface, Alarm Relay and Audible-Visual Alarm Output |
| Signal Bus Transmission Distance | ≤1000m |
| Working Voltage | DC18V~DC28V (Rated: DC24V) |
| Power Consumption | <2W |
| Temperature Range | -40℃~+70℃ |
| Humidity Range | 0~95%RH (No Condensation) |
| Pressure Range | 86kPa~106kPa |
| Shell Material | Metal |
| Overall Weight | 2kg |
| Installation Thread | G3/4" |
| Dimensions | 150×177×72 (mm) |
| Protection Class | IP66 |
| Explosion-proof Mark | Ex d IIC T6 Gb/Ex tD A21 IP66 T80℃ |
| Note | Audible and Flash Functions are Optional |
Tags:
