Detalles del producto
Lugar de origen: Porcelana
Nombre de la marca: BOEN FIRE
Certificación: ISO9001、CCCF、CNEX、SIL2
Número de modelo: GT-CDI2950DEx
Condiciones de pago y envío
Cantidad de orden mínima: 1
Precio: Negociable
Tiempo de entrega: 15-20 días
Condiciones de pago: LC, T/T
Certificación: |
CCC, explosion-proof (CNEx22.1282X), type approval & inspection report, compliant with GB standards |
Detección: |
Combustión catalítica (intercambiable en caliente), 3~100% LEL, respuesta ≤30 s, difusión natural |
Sensor: |
Vida útil de 3 años, para metano/propano/hidrógeno. |
Alarma: |
Umbrales de 25%/50% LEL, alarma opcional audible (75~95dB)/visual (70Cd) |
Comunicación: |
4-20mA + RS485 (Modbus), transmisión ≤1000m |
Hardware: |
DC18~28V, -40~70℃, IP66, caja metálica (2kg), rosca G3/4" |
Visualización y funcionamiento: |
Pantalla LCD, control remoto por infrarrojos (≤5m), ajuste de umbral de dirección/alarma |
Mantenimiento: |
Calibración cada 6 meses, verificación anual, reemplazo de sensor con recalibración |
Certificación: |
CCC, explosion-proof (CNEx22.1282X), type approval & inspection report, compliant with GB standards |
Detección: |
Combustión catalítica (intercambiable en caliente), 3~100% LEL, respuesta ≤30 s, difusión natural |
Sensor: |
Vida útil de 3 años, para metano/propano/hidrógeno. |
Alarma: |
Umbrales de 25%/50% LEL, alarma opcional audible (75~95dB)/visual (70Cd) |
Comunicación: |
4-20mA + RS485 (Modbus), transmisión ≤1000m |
Hardware: |
DC18~28V, -40~70℃, IP66, caja metálica (2kg), rosca G3/4" |
Visualización y funcionamiento: |
Pantalla LCD, control remoto por infrarrojos (≤5m), ajuste de umbral de dirección/alarma |
Mantenimiento: |
Calibración cada 6 meses, verificación anual, reemplazo de sensor con recalibración |
GT-CDI2950DEx Industrial and Commercial Point-Type Flammable Gas Detector
1.Product Overview
This product is an explosion-proof device, suitable for Zone I and Zone II environments where there may be leakage or explosion hazards of flammable or toxic and harmful gases in industries such as petroleum, chemical engineering, gas storage stations, and wine factory production workshops. It is not applicable to Zone 0 or underground coal mine environments. The detector can conduct safe detection and give advance alarms for gas leakage accidents.
The detector features TFT liquid crystal display, infrared remote control, three-wire 4mA-20mA output, RS485 bus communication (Modbus RTU protocol), and passive contact output functions.
2.Product Features
(1) Adopts a segment LCD display with infrared remote control function, making debugging convenient.
(2) Uses a thermistor sensor, enabling maintenance personnel to replace all sensors in the entire site easily.
(3) Equipped with sound and light alarm function. When detecting combustible gas leakage, the detector will issue a harsh sound and light alarm to avoid.
(4) Has zero-point correction function, which can avoid measurement errors caused by zero-point drift.
(5) Features a standard RS485 interface based on the Modbus (RTU) protocol.
(6) Can be matched with JB-QB-CH210 combustible gas alarm controller, PLC, DCS and other systems for use.
(7) Adopts a single-chip microcomputer processing system, which has stable performance, strong anti-interference ability and low power consumption.
3.Main Technical Data
| Item | Content |
| Detection Principle | Catalytic Combustion (Hot-swappable Type) |
| Sampling Method | Natural Diffusion |
| Detection Range | 3~100%LEL |
| Resolution | 1%LEL |
| Response Time | ≤30s |
| Measurement Error | Full Scale ±3%LEL |
| Resolution | 1%LEL |
| Low Alarm Value | 25%LEL |
| High Alarm Value | 50%LEL |
| Audible Intensity (Optional) | 75~95dB |
| Flash Intensity (Optional) | 70cd |
| Applicable Gas | Methane, Propane, Hydrogen |
| Display Mode | LCD Display |
| Signal Transmission | 4mA~20mA Output, Standard RS485 Interface, Alarm Relay and Audible-Visual Alarm Output |
| Signal Bus Transmission Distance | ≤1000m |
| Working Voltage | DC18V~DC28V (Rated: DC24V) |
| Power Consumption | <2W |
| Temperature Range | -40℃~+70℃ |
| Humidity Range | 0~95%RH (No Condensation) |
| Pressure Range | 86kPa~106kPa |
| Shell Material | Metal |
| Overall Weight | 2kg |
| Installation Thread | G3/4" |
| Dimensions | 150×177×72 (mm) |
| Protection Class | IP66 |
| Explosion-proof Mark | Ex d IIC T6 Gb/Ex tD A21 IP66 T80℃ |
| Note | Audible and Flash Functions are Optional |
